Pulsar Rechargeable Li-Pol Battery Pack EPS3I are designed to power Pulsar and Yukon digital devices, thermal imagers, thermal and night vision riflescopes. Battery Packs can be used with devices of the Digisight, Digiforce, Quantum, Apex, Ranger series and other equipment outfitted with an external power supply jack and Weaver rail or 1/4" socket.
The EPS3I has a capacity of 2.4Ah, is equipped with a mount to be affixed to a Weaver rail of a device.
The EPS3I Battery Pack has a low battery indicator which allows you to permanently control your battery status and avoid unexpected discharge
Increased Working Time
One Battery Pack EPS3I allows an increase working time for thermal imaging and digital devices in comparison with the time of normal battery packs.
External Power Supply EPS3I has a LED charge indicator and can be activated by pushing the button on the front side of the device.
Waterproof Plastic Body
EPS3I has a hard waterproof plastic body (class IPX5) that prevents all inner parts (electronics, batteries) from climatic and mechanic impacts.
External Power Supplies EPS3I has a mount Weaver and can be installed on the body of different devices that possess an applicable rail.
The EPS3I is supplied with an extension cable which allows it to be stored in any suitable place, in a pocket, for example, when using a NV device in freezing weather and to increase operating time up to total discharge.
Battery type - Li-Pol
Capacity (С), - 2.4 Ah
Rated voltage, - 12V
Charging voltage, - 12.6V
Discharge voltage, - 8.9V
Full charge time, - 4 hours
Full discharge time (I=250 mА), - 9 hours
Charge temperature range °C - 0 .. +45
Operating temperature °C -20 .. +60
Mains voltage range V, - 240
Degree of protection, - IPX5
Dims mm, 85x76x40
Weight kg, 0.23
WHAT'S IN THE BOX
- Battery Pack EPS3I
- Mains Charger Unit 110 … 220 V
- Car Adapter (2.1 mm DC Socket)
- AU Plug Adapter
- Adapter for devices with a 1/4" socket
- User manual
- Australian Warranty Card